How to Fill a Caliburn Koko Prime Pod

Filling your Caliburn Koko Prime pod might seem like a simple task, but mastering the process ensures the best performance from your device. Here’s a detailed guide to help you fill your pod correctly, enhancing your vaping experience and prolonging the life of your device.

Understanding Your Caliburn Koko Prime Pod

Before diving into the filling process, it's essential to understand your Caliburn Koko Prime pod. This pod system is designed for ease of use and efficiency. It features a sleek design, a top-fill system, and a convenient side window that allows you to monitor e-liquid levels. Knowing these features will make the filling process smoother.

Step-by-Step Guide to Filling Your Pod

1. Preparation

   • Choose Your E-Liquid: Select an e-liquid with a PG/VG ratio suitable for your vaping style. For most pod systems, a higher PG (propylene glycol) ratio is recommended.
   • Clean Your Pod: Ensure the pod is clean and dry before filling. If you’ve used the pod before, rinse it with warm water and let it dry completely.

2. Open the Pod

   • Locate the Fill Port: On the Caliburn Koko Prime pod, the fill port is typically located on the top. It is often covered by a rubber plug or a removable cap.
   • Remove the Cap: Gently pull or twist off the rubber cap to expose the fill port. Be careful not to damage the cap or any seals.

3. Fill the Pod

   • Insert the E-Liquid: Using a dropper or nozzle, slowly insert the e-liquid into the fill port. Avoid overfilling; leave a small air bubble at the top to prevent leaks.
   • Watch for Bubbles: As you fill, you might see bubbles rising. This is normal and indicates that the air is escaping from the pod.

4. Seal the Pod

   • Replace the Cap: Once filled, securely replace the rubber cap or lid. Ensure it is sealed tightly to prevent leakage.
   • Check for Leaks: Before inserting the pod back into your device, check for any leaks around the fill port. If you notice any, clean the area and try refilling.

5. Prime the Coil

   • Let It Sit: After filling, let the pod sit for a few minutes to allow the e-liquid to saturate the coil properly. This helps avoid dry hits and ensures a smooth vaping experience.
   • Test the Device: Before taking a full puff, take a few short draws to make sure the e-liquid is well-distributed.

Troubleshooting Common Issues

• Leaking: If your pod is leaking, it might be due to overfilling or a loose cap. Check and adjust the fill level and ensure the cap is firmly in place.
• Dry Hits: If you experience dry hits, the coil may not be properly saturated. Allow the pod to sit longer after filling and ensure the e-liquid level is adequate.
• Gurgling Sounds: Gurgling sounds can occur if the pod is overfilled or if air bubbles are trapped. Remove excess e-liquid if needed and check for air bubbles.

Maintaining Your Pod System

Regular maintenance of your Caliburn Koko Prime pod will extend its life and maintain performance:

• Clean the Pod: Regularly rinse and dry the pod to prevent residue buildup.
• Check for Wear: Inspect the pod and cap for any signs of wear or damage. Replace parts as needed.
• Avoid Overfilling: Stick to the recommended fill level to avoid leaks and ensure optimal performance.

By following these steps and tips, you'll maximize the performance of your Caliburn Koko Prime pod and enjoy a superior vaping experience. Happy vaping!